Here's a Cisco link for troubleshooting an IPSec anti-replay errors.
I was troubleshooting and observed a lot %CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed logs in a Cisco router configured for IPSec VPN:
*Sep 18 00:16:48 UTC: %CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed
connection id=349, sequence number=4838
*Sep 18 00:26:35 UTC: %CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed
connection id=349, sequence number=499055
*Sep 18 00:27:50 UTC: %CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed
connection id=349, sequence number=591422
*Sep 18 00:30:58 UTC: %CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed
connection id=349, sequence number=884929
*Sep 18 00:31:58 UTC: %CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed
connection id=349, sequence number=969290
You can verify if the IPSec Security Association (SA) is from a legitimate peer using the show
crypto ipsec sa | in peer|conn id command
2900#show crypto ipsec sa | in peer|conn id
current_peer 110.17.9.8 port 500
current_peer 175.23.30.6 port 19302
conn id: 2349, flow_id: Onboard VPN:349, sibling_flags 80000040, crypto map: VPN-PROFILE-head-1
conn id: 2350, flow_id: Onboard VPN:350, sibling_flags 80000040, crypto map: VPN-PROFILE-head-1
You can adjust the replay window size once the SA peer is confirmed and it's not doing a man-in-the-middle (MITM) attack. The default window size is 64 packets.
2900#show run all | inc crypto ipsec
crypto ipsec optional retry 300
crypto ipsec security-association lifetime kilobytes 4608000
crypto ipsec security-association lifetime seconds 3600
no crypto ipsec security-association replay disable
crypto ipsec security-association replay window-size 64
crypto ipsec security-association dummy
crypto ipsec transform-set default esp-aes esp-sha-hmac
crypto ipsec transform-set VPN-TSET esp-aes 256 esp-sha-hmac
crypto ipsec nat-transparency udp-encapsulation
crypto ipsec profile VPN-PROFILE
crypto ipsec profile default
Use the crypto
ipsec security-association replay window-size <WINDOW SIZE> command. Start with 512 first, clear and observe the logs again.
2900#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
2900(config)#crypto ipsec security-association replay window-size ?
1024 Window size of 1024
128 Window size of 128
256 Window size of 256
512 Window size of 512
64 Window size of 64 (default)
2900(config)#crypto ipsec security-association replay window-size 512
2900(config)#end
2900#write memory
Building configuration...
[OK]
2900#clear log
Clear logging buffer [confirm]
I didn't observe the said logs afterwards (for almost more than 30 mins).
*Sep 18 01:08:37 UTC: %CLEAR-5-COUNTERS: Clear counter on all interfaces by admin on vty0 (202.7.6.8)
2900#
2900#show clock
*01:46:12.854 UTC Mon Sep 18 2023
